Dataman T51Pro

Teslim süresi, stok durumu ve fiyat bilgisi için
+90 (0312) 394 79 20 telefon numarasını arayabilir, iletişim mail adresine eposta gönderebilirsiniz.

Quick Overview
40-pin MCS51 and AVR chip programmer with ISP capabilities and USB 2.0 connectivity. Dataman T51Pro is a small, fast and powerful programmer supporting over 12,000 MCS51 and AVR microcontrollers.
40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
The programmer performs device insertion test and contact check before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error.
T51Pro programmer performs programming verification at the marginal level of supply voltage, which improves programming yield and guarantees long data retention.
Easily upgradeable to the 40Pro programmer
Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSSOP, TSOP and other packages.
Programmer Specification
Base Unit (DAC)
Two D/A converters for VCCP and VPP, controllable rise and fall time
VCCP range 2V..7V/350mA
VPP range 2V..25V/200mA
USB 2.0/1.1 compatible interface
Auto calibration
Self test capability
ZIF Socket
40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
Pindriver: 40 TTL pindrivers, specialised GND/VCC/VPP pindriver for MCS51 and AVR devices
Spare GND, VCC and VPP driver, which add additional made-by-wire GND/VCC/VPP pin capability for future devices
FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins; level H selectable from 1.8V up to 5V
Continuity test: each pin is tested before every programming operation
ISP Connector
10-pin male type with miss insertion lock
6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices
1x VCCP voltage (range 2V..7V/100mA) and 1x VPP voltage (range 2V..25V/50mA)
Programmed chip voltage (VCCP) with both source/sink capability and voltage sense