Universal gang programmer with eight fully isolated 48-pin ZIF sockets and USB 2.0 connectivity. Concurrent and semi-concurrent programming options combine with device insertion tests to give higher programming yields and reduced failure rates.
The 848XP is built to meet the demands of high volume production programming with minimal operator effort.
General
To meet your future needs for high density flash chips, utilizing the PC's resources; it supports memory devices from 128K bit to Gigabit without the need for hardware upgrades. The Dataman 848XP also provides 48-pin TSOP, 44-pin PSOP, 40-pin TSOP, and 32-pin TSOP universal adapters for all the flash chips eliminating the need to purchase multiple adapters and further reducing costs.
On-board intelligence reduces the system's overhead to a minimum. It can program 8 x 8Mb flash chips (Intel 28F800B3) within 45 seconds; an experienced operator can program thousands of high density devices per day. In addition, with the semi-concurrent programming capability, you can divide the 8 sockets into two groups of four allowing you to program one group while simultaneously removing or inserting devices from the other group.
Each socket's address, data bus, control lines, power supply and programming voltage are isolated (> 1M ohm). Additionally, sockets have independent build-in Vcc and Vpp current limit circuitry meaning a defective device will not affect the programming integrity of other devices.
Device insertion and continuity checks are carried out before programming each device. It can detect poor pin contact and device insertion errors including position and pin number mismatch. This function prevents damage to expensive devices due to operator error.
The Dataman 848XP has implemented patented technology in its design; once the chips are inserted into the ZIF sockets, it automatically checks for poor pin contact and device insertion errors. If a problem is found and not corrected within the adjustable time period, Dataman 848XP will shutdown the socket and continue programming the rest of devices without any further input from the operator.
The Dataman 848XP is designed to have minimum down time. The eight sockets are divided into four identical independent modules, each containing two sockets. If a module fails, the Dataman 848XP can still operate the other modules allowing production to continue without having to stop for repair.
Additional safety features such as a built-in current limit and pin continuity check function. This prevents damage from faulty chips during the programming cycle.
The Dataman 848XP supports 2.7V ~ 5.0V logic level input/output, and it can supply 2.0V~21V analog voltage (such as VCC).
Universal pin driver capability lets it program all 48-pin DIL devices, including single-chip Micro-controllers, without adapters. However due to the number of different packages beside DIL, we have developed over 100 different adapters to support these special-package devices.
Programmer Specification
Base Unit (DAC)
Power: 100 to 240 VAC, auto-switching
Frequency range: 47 to 63 Hz
Power consumption: 65 W
Operating temperature: 5 to 45°C (41 to 113°F)
CE & LVD certified ZIF Socket 8 fully isolated 48 pin
ZIF socket
with receptacle, over 1 M ohm resistance between each socket
Four DACs for Vcc, Vpp1, Vpp2 and Vpp3 with 8bit resolution
Vcc range 2V to 7.5V, resolution 50mV
Vpp1, 2 and 3 range 5V to 16V resolution 100mV
Over current protect on all voltage source
Logic level 5V to 2.7V programmable by software
