UNIVERSAL PROGRAMMER HIGHLIGHTS
- Supports 90,000+ IC devices from 320+ IC chip manufacturers.
- Capable of stand-alone operation (requires optional CF card)
- Supports low voltage chip types with Vcc as low as 1.2v.
- High programming throughput
- USB 2.0 high-speed PC interface
- Supports Windows XP / Vista / Windows 7 / Windows 8
- CE and RoHS compliant
IC CHIP DEVICE SUPPORT
- Supports 90,000+ IC devices from 320+ IC chip manufacturers.
- IC device types supported include:
- FLASH memory, EPROM, EEPROM, Serial EEPROM, FPGA Configuration Serial PROM, NVRAM, PAL, PLD, CPLD, EPLD, NAND Flash, Microcontroller, PIC Micro, Logic Devices, etc.
- Supports standard DIP and skinny DIP packages from 8 to 48-pins on standard equipment
- Supports a wide variety of surface-mount devices (SMDs) and other IC device packages with reliable factory-made adapters. Packages supported include: PLCC, CLCC, SOIC, LAP, DFN, QFN, QFP, TQFP, LQFP, PAFP, TSOP, SOP, SSOP, PSOP, TSSOP, SON, BGA, EBGA, FBGA, VFBGA, µBGA, etc.
- Free software updates can be downloaded via internet at any time.00
PROGRAMMER SPEED
- Ultra fast programming speed via USB interface.
- Programs high-density flash memory chips at near-theoretical maximum programming speed.
- Programs and verifies a 64M-bit NOR flash memory in 11.3 seconds and a 1G-bit NAND Flash in 108 seconds.
- The auto-start feature allows programming to start automatically as soon as a chip is inserted.
| Programming Speed Examples |
| IC Chip Type | IC Chip Manufacturer | IC Chip Part # | Program and Verify |
| 64Mb NOR FLASH | AMD | AM29DL640G | 27.6 SEC |
| 512Mb NAND FLASH | SAMSUNG | K9F1208U0B | 67.4 SEC |
| 32KB Flash Micro | ST | 72F324BK4B5 | 3.8 SEC |
| 1Gb NAND FLASH | SAMSUNG | K9F1G08U0A | 116.5 SEC |
| 64Kb EEPROM | ATMEL | AT28C64B | 0.9 SEC |
| 128Kb SERIAL EEPROM | MICROCHIP | 24AA128 | 4.5 SEC |
| 20KB FLASH MCU | ATMEL | AT89C55 | 7.5 SEC |
ADVANCED UNIVERSAL PROGRAMMER HARDWARE
- Advanced hardware design provides clean signals and allows programming of low-voltage chips reliably.
- The programmer has 144 universal pin-drivers built-in. There is no need to add additional or optional pin-drivers even when you are programming large complex chips, up to 144-pins. (As long as you have the proper SMD-to-programmer adapters.)
- Since each pin-driver is software programmable, proper voltage levels will be applied to each and every pin, not just the Vcc pins, allowing true low-voltage programming for low-voltage chips.
- Reverse insertion check and pin continuity check help to prevent chips from accidental damage.
- Over-current and over-voltage protection ensures safety of the chips and programmer hardware.
EASY-TO-USE UNIVERSAL PROGRAMMER SOFTWARE
- Programmer-control S/W supports XP / Vista / Windows 7 / Windows 8.
- User-friendly software allows you to do these and more easily:
- Read data from a master chip, put it in the data buffer
- Save the data to a file
- Program a new chip with this data
- Erase a used EE chip before program it
- Secure the chip so that others cannot copy it
- Load data from a file instead of from a master chip
- Display the data buffer on the screen and allow you to edit it
- Plus a whole lot more
- The Auto-program command allows you to erase a chip, blank-check the chip, program it, and verify it, all automatically with just one click.
- The Project function simplifies operations for your production people or yourself. Settings such as chip selection, file name selection, chip configuration, program options, etc., can be saved into project files.
- Advanced functions allow you to do things that would be impossible to do with other universal programmers. These include:
- Data splits: 1-to-2, or 1-to-4, for both byte-wide and word-wide chips.
- Byte swap: for Intel or Motorola byte arrangements
- Optionally do write-protection on selected sectors
- Optionally do read-protection on selected blocks
- Do specific chip configurations for Microchip PIC micros
- Setup counters so that your operator can easily keep track of how many chips have been programmed.
- Plus a whole lot more
FLEXIBLE MULTI-MODE OPERATIONS
- Convenient PC-controlled mode, via high speed USB 2.0, lends to easy operation for the R&D and engineering environment.
- Stand-alone operation is provided by a built-in 6-key keyboard and a 4-line LCD display. (Requires optional Compact Flash Card for storing programming algorithms which are downloaded from PC to programmer. Once the programming algorithms and data files are stored in the Compact Flash Card, the programmer can be operated without connection to a PC.)
- The programming unit is light-weight and portable, good for field applications and international travel (takes 100V to 240V AC).
USEFUL AS A PRODUCTION PROGRAMMER
- Putting multiple units together in stand-alone mode creates a multi-site concurrent programming environment for volume production. The advantages, over a traditional gang programmer, are:
- Flexible and expandable: start with one unit and expand by adding more units when the need arises.
- Less down time: in case of a failure of one unit, other units can continue to operate.
- Concurrent programming: each programmer begins to program as soon as its socket has been loaded. Chances are, by the time you finish loading the last programmer, the first one is already done.
IC CHIP DEVICE SUPPORT
- IC Chip Device Types Supported:
- EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory (NOR and NAND), Firmware HUB, EPLD, CPLD, SPLD, Bipolar PROM, NOVRAM, Microcontroller, Microchip PIC, MCU, Standard Logic, etc.
- Chip Packages Supported on Standard Equipment:
- DIP, SDIP.
- Chip Packages Supported with Optional SMD Adapters:
- PLCC, CLCC, SOIC, LAP, DFN, QFN, QFP, TQFP, LQFP, PQFP, TSOP, SOP, SSOP, PSOP, TSSOP, SON, BGA, EBGA, FBGA, VFBGA, µBGA, etc.
